General short-distance transport standard injection moulding machine does not pack, in order to save time and packaging costs. In transportation, attention should be paid to avoiding rain, covering the raincloth, avoiding leakage of electricity and accelerating aging of the machine caused by rain infiltration into the machine. Some bridges, tunnels and culverts have height restrictions, which should be imposed on standard injection moulding machines after boarding. Pay attention to the support and fixing of the machine in order to prevent collision and displacement in transportation. When long-distance train consignment and customers have special needs, it should be packed in ordinary wooden boxes for rust-proof and moisture-proof treatment. When packing, fix the machine. The wooden box should have marks on it, such as the lifting position, the place of delivery and the place of arrival.

Lifting machines should select suitable standard cranes. The weight of the machine is shown in the specification sheet. When hoisting, the center of gravity of the standard injection moulding machine should be hoisted, or the impact, swing and inversion should not be allowed in the process of hoisting according to the hoisting mark on the package.

The standard injection moulding machine should be placed in an appropriate position, without moisture, dust and flat ground. The machine should be put on a shock-proof rubber pad after placing it smoothly, so that the machine can maintain balance. In order to facilitate the operation and maintenance of the machine, at least 1-1.5m of space is reserved around the machine, while good working conditions can prevent the machine and products from being dirty.