- Brake-type low-table disc injection molding machine: an efficient and stable manufacturing solution!
- The present situation and trend of China machine industry
- What do you need to pay attention to before the vertical injection machine is shut down
- The increase of injection products -- the popularity of injection molding machine is just around the corner.
- The factors that affect the molding of the vertical injection molding machine
Contacts:Hanna WANG phone:0769-81929376 Email:waimao005@dg-taifu.com address:Fulong Yangwu Industrial Area, Shipai Town, Dongguan City, Guangdong Provice, China
The advantage of vertical high-speed injection molding machine
source: time:2023-11-21 Click:419
The advantage of vertical high-speed injection molding machine
The vertical high-speed injection molding machine is a high-injection molding machine and belongs to one of the subdivisions of injection molding machines. Compared with conventional injection molding machines, high-speed vertical injection molding machines have higher injection speeds, up to about 500mm/s.
The advantage of increasing the injection rate is that it can greatly improve the injection molding efficiency, but it also has some disadvantages, that is, the injection volume and injection size are missing. Due to the fast injection speed, this kind of machine usually does not need to add a servo energy-saving motor, because the injection molding cycle is very short and the energy-saving effect is limited.
High-speed vertical injection molding machines are mainly suitable for various small-size injection molding applications. For example, products with thickness below 0.02, connector accessories, etc., and some liquid silicone products can be produced by high-speed vertical injection molding machines.
In summary, the main advantage of a vertical high-speed injection molding machine is its ability to perform rapid injection molding, which can improve injection molding efficiency. However, it should be noted that the selection of a suitable injection molding machine should be evaluated based on specific products and requirements, taking into account factors such as injection speed, injection volume, size requirements, and energy consumption to meet production needs and obtain the best results.
Recommended Products MORE+
-
15 Ton Standard Vertical Injection Molding Machine TFV2-15
-
20 Ton Standard Vertical Injection Molding Machine TFV4-20
-
120 Ton Rotary Vertical Injection Molding Machine TFV4-120R2
-
35 Ton Standard Vertical Injection Molding Machine TFV4-35
-
55 Ton Standard Vertical Injection Molding Machine TFV4-55
-
Motor Rotor
-
Plastic Overmolding
-
Terminals
-
Plastic Accessories
-
SIM Card Tray Holder Slot